Position：Home｜Product

6-inch semi-automatic precision dicing saw

SD612B

A new upgraded high-precision, high-performance 6-inch semi-automatic precision dicing saw, equipped with high-precision and high-rigidity DC spindle, high-precision lead screw guide rail, Y-axis grating + servo motor full closed loop system, can provide customers with efficient, high-quality, low-cost dicing experience.

Contact Us

Product Function

Cut multiple pieces on the same plate；
Automatic alignment, automatic knife mark detection function；

Multiple dicing modes: one-way/two-way, automatic/semi-automatic；
Layer dicing: Slot/cut；

System operation rights are managed at different levels；
OFN Remove border function；
* High precision non-contact height measurement；

* Knife damage detection function；
* Online knife sharpening function；
* Optional function；

Product Characteristics

High precision lead screw, guide rail, equipped with high inertia motor to ensure high precision and high stability.；

Eﬃcient autofocus, image recognition, and knife mark inspection make the dicing operation easier.；

A variety of dicing modes are available, and customized software is provided according to customer material characteristics.；

Optional NCS module, BBD module, remote control module.；

Equipment parameters

Equipment model：SD612B
Work panel size	Six inches/165*165mm Square panel
Maximum dicing thickness	≤4mm or Customization
X-axis	Y-axis
Control system：AC servo motor	Control system：AC servo motor +Grating closed loop system
Maximum stroke(mm)：360	Maximum stroke(mm)：180
Eﬀective dicing stroke(mm)：170	Eﬀective dicing stroke(mm)：170
Resolution(mm)：0.0001	Resolution(mm)：0.0001
Dicing speed(mm/s)：0.1~400	Single step positioning accuracy(mm)：0.002/5
Z-axis	θ-axis
Control system：AC servo motor	Driving mode：Direct driver
Maximum stroke(mm)：30	Rotation angle(°)：380(-100~280)
Maximum applicable blade(mm)：Φ58	Resolution(°)：0.0002
Resolution(mm)：0.0001
Repeated positioning accuracy(mm)：0.001
Principal Axis	Visual System
Power(kW)：2.4/customization	Compose：Light source/Lens/Camera
Rotational speed(rpm)：6000~50000	Capabilities：High precision/Fast speed/Accurate positioning

Equipment size WDH(mm)	6809501750
Weight(kg)	about 500
Power supply(V)	Single phase AC220V±10% 3kVA

Product Application

Ceramic substrate
Aluminium nitride
ceramic
Bismuth telluride
Silicon based wafer
NTC

Operating Environment Requirements

Ambient temperature
Install the machine in a clean room environment with a temperature of 20 to 25°C(fluctuation range +1), relative humidity of 40 to 60%, no condensation, no strong magnetic field, no corrosive gas, and no obvious vibration, and avoid installation near blowers, vents, and equipment that produces high temperature and oil mist.；

Compressed air
The oil content of the air source is less than 0.5mg/m3, and the filtration degree is more than 0.01um/99.5%. The air pressure is 0.5-0.6MPa.；

dicing water
The water pressure is 0.2-0.4MPa, the water temperature is controlled at room temperature ±2℃, and the process with special requirements for dicing water is provided according to the actual requirements.；

Cooling water
The quality of the main shaft cooling water directly affects the accuracy and stability of the main shaft, requiring the main shaft cooling water to be clean and free of impurities, it is recommended to use a pure water machine circulation water supply, water temperature control at room temperature soil 2℃, pressure 0.2-0.4MPa.；

中文

6-inch semi-automatic precision dicing saw

Wechat Official Account

Tiktok Official Account

Telephone：

0551-63860654

Address：

Building 2, Hupu Industrial Park, No.4715 Wangjiang West Road.High-tech Zone, Hefei City,Anhui Province

Email：

acc-psm@hfakrs.com